Add sling mount pin to fixed stock

Go down

Add sling mount pin to fixed stock

Post by Seanm on Tue Apr 09, 2013 1:35 am

Does anyone know if I can add the sling mount pin to the fixed stock? I noticed 2 allen head screws, one on top and one on the bottom where the hinge pin would be...

Seanm

Posts : 6
Join date : 2013-04-09

Back to top Go down

Re: Add sling mount pin to fixed stock

Post by Seanm on Tue Apr 09, 2013 1:40 am

If you remove the screws does the stock come off?

Seanm

Posts : 6
Join date : 2013-04-09

Back to top Go down

Re: Add sling mount pin to fixed stock

Post by Solscud007 on Tue Apr 09, 2013 6:34 am

Yes. If you remove the screws, then pop the hing pin out, you can slide the stock off.

You might need a longer screw but yes you can add a sling QD cup.

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 38
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Add sling mount pin to fixed stock

Post by Seanm on Wed Apr 10, 2013 3:36 am

Thanks for the info, after you remove the hinge allen on top I just pushed the sleeve out with a punch. I took the stock off , it slides to the RT side. I have a CA model so the round delete pin where the button release would be is bolted in to a plate. I reinstalled the stock and put in the sling pin. The single point sling seems to get in my way when I aim due to the location. I guess I have to get used to it...

Seanm

Posts : 6
Join date : 2013-04-09

Back to top Go down

Re: Add sling mount pin to fixed stock

Post by Jedi380 on Wed Apr 10, 2013 7:50 am

I have a sling loop that attaches to the top rail. I have it just in front of the rear sight, and it works well for the SDP. It should work for the carbine also.

_________________
Never Laugh At A Sleeping Dragon.
avatar
Jedi380

Posts : 239
Join date : 2013-01-24
Location : Dayton, OH

Back to top Go down

Re: Add sling mount pin to fixed stock

Post by Solscud007 on Wed Apr 10, 2013 8:19 am

Check this thread for alternatives.

http://www.krisstalk.com/t76-vector-sling-mounts

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 38
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Add sling mount pin to fixed stock

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum