Shooting 9mm vector without shroud
4 posters
KRISSTALK :: . :: KRISS Talk
Page 1 of 1
Shooting 9mm vector without shroud
Hi all, I'm just wondering if the 9mm vector can be fired without the barrel shroud (18.6" barrel), or if this will damage the carbine. Any impacts on accuracy?
Thanks in advance!
Thanks in advance!
Stormm12- Posts : 9
Join date : 2016-11-27
Re: Shooting 9mm vector without shroud
Sorry double posted
Last edited by EchoLimaBravo on Sun Nov 27, 2016 7:56 pm; edited 1 time in total
EchoLimaBravo- Posts : 31
Join date : 2016-11-20
Location : Michigan
Re: Shooting 9mm vector without shroud
It's a shroud, so by definition it won't affect function. Although there isn't much real estate for a lead hand grip without it...that will likely affect accuracy just from a shooting platform basis.
Why the question?
Why the question?
EchoLimaBravo- Posts : 31
Join date : 2016-11-20
Location : Michigan
Re: Shooting 9mm vector without shroud
I just find the Canadian version heavy, and it looks very bulky with the shroud, in my opinion. I use a vfg on the real, so no shroud will not change my shooting. I was just worried that the shroud may prevent flexing of the barrel or something. Although I know barrel harmonics are important so maybe accuracy would get even better!
Stormm12- Posts : 9
Join date : 2016-11-27
Re: Shooting 9mm vector without shroud
I hate my shroud as well. The vector carbine isn't balance in weight well. Most of its weight is up front. At first it isnt much but after an hour of shooting you definetly feel the fatigue. Here in NJ I must have a 16" barrel. I've taken the shroud off just to feel the difference in weight and it's a whole lot better, but never fired it with the shroud off. I can only assume how much fun the sbr version would be to own.
DBLSHOT79- Posts : 20
Join date : 2016-11-12
Re: Shooting 9mm vector without shroud
Yeah, the weight is awesome without the shroud. I'm going to try to shoot it the next time I go out. Here in Canada we can own the SBR, but it has to be registered and can only be used at an approved range. The CRB (18" barrel) is non-restricted and does not need to be registered.
Stormm12- Posts : 9
Join date : 2016-11-27
Re: Shooting 9mm vector without shroud
Can also run the bare barrel and slap a DiamondHead handguard on there... while it adds weight, it does offer more real estate for hand positions that don't contact the barrel itself:
http://www.diamondhead-usa.com/collections/rails/products/vrs-handguard-for-kriss-vector-crb-45acp
http://www.diamondhead-usa.com/collections/rails/products/vrs-handguard-for-kriss-vector-crb-45acp
scootle- Posts : 3
Join date : 2016-10-30
Similar topics
» Does the Shroud for the Real Kriss Vector work for the KWA GBB Airsoft Vector?
» Vector CRB Square Shroud On Gen 1
» KRISS SDP shooting low Master Thread
» Is the Shroud even needed on the CRB?
» WTS: Kriss Vector barrel shroud, Burris fastfire II
» Vector CRB Square Shroud On Gen 1
» KRISS SDP shooting low Master Thread
» Is the Shroud even needed on the CRB?
» WTS: Kriss Vector barrel shroud, Burris fastfire II
KRISSTALK :: . :: KRISS Talk
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum