Ace 1 Arms ambi mag release review
+2
hydepark308
Solscud007
6 posters
Page 1 of 1
Re: Ace 1 Arms ambi mag release review
Any chance we could get the other couple people who said that they have received them to get some pictures up? I'm interested to see if the same problems Solscud had are universal.
hydepark308- Posts : 45
Join date : 2014-04-29
Location : Colorado
Re: Ace 1 Arms ambi mag release review
I got a few minutes today to mess with it, it does fit and will work, but as Solscud has experienced, it is a snug fit. Watch the video that Solscud has made for installation and use a file like he shows in it. I have not had a chance to do further work but I do have the small files that will be needed. Just go slow and go easy and test fit frequently and you should have no problem.
kanewtervalve- Posts : 31
Join date : 2014-02-06
Re: Ace 1 Arms ambi mag release review
Update: Ok, it's in and works well, make sure you have a good set of metric allen wrenches, small file and something to pop out the spring that holds the mag release in place(I used a steel dental pick). The problem was exactly where Solscud shows in his video/pics that needs filing. I also recommend blue locktite once everything is working and in place, the one screw (as Solscud pointed out) needs to be backed off a little but if locktite is used it won't go anywhere once it dries.
kanewtervalve- Posts : 31
Join date : 2014-02-06
Re: Ace 1 Arms ambi mag release review
Thanks for the update. I was wondering, is it possible to use a washer or spacer on that problem screw to keep it the correct distance out? I know loctite will probably work, but it seems that getting it cinched down with a lock washer AND loctite would be preferable.
Don't tell solscud, but I went ahead and ordered one the other night. LOL I just couldn't wait, sorry. I'll try to get out the camera when it gets here and see what's what. Most likely I will try to file on the part rather than my gun. If it's a $40 part vs. a $1600 gun, I think I'd rather mess up the lever. That's just me. There are a few hardware stores around here that sell small washers and spacers, or I could always ask my gunsmith to scrounge something up. Anyway, hopefully it will be here this coming week and I'll give an update.
Don't tell solscud, but I went ahead and ordered one the other night. LOL I just couldn't wait, sorry. I'll try to get out the camera when it gets here and see what's what. Most likely I will try to file on the part rather than my gun. If it's a $40 part vs. a $1600 gun, I think I'd rather mess up the lever. That's just me. There are a few hardware stores around here that sell small washers and spacers, or I could always ask my gunsmith to scrounge something up. Anyway, hopefully it will be here this coming week and I'll give an update.
hydepark308- Posts : 45
Join date : 2014-04-29
Location : Colorado
Similar topics
» PNW Arms ammo review
» Ace 1 Arms - KRISS Vector Right Hand Magazine Release
» .45 ACP book review
» KWA KRISS Airsoft SMG
» Right hand mag release. The MagLev
» Ace 1 Arms - KRISS Vector Right Hand Magazine Release
» .45 ACP book review
» KWA KRISS Airsoft SMG
» Right hand mag release. The MagLev
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|