Awesome Muzzle Brake for Kriss!

http://www.grizzlygunworks.com/

http://shop.grizzlygunworks.com/
(Scroll down some)

Look what I stumbled upon. I can't yet wrap my mind around how this would change the feel of the weapon.
I still want one. Anyone have any opinions or experience with them?

Very Exciting looking gear indeed.

http://shop.grizzlygunworks.com/product.sc;jsessionid=43F45942FE0CE26AE4B31A4B4FC96C23.qscstrfrnt02?productId=38&categoryId=1

There is the direct link.

I like the fake suppressor. I can pretend in NY haha.

http://shop.grizzlygunworks.com/product.sc;jsessionid=43F45942FE0CE26AE4B31A4B4FC96C23.qscstrfrnt02?productId=54&categoryId=1

Looks cool but really $190

$225 for one of the versions.
So, the stock barrel shroud comes off and the bare barrel received this on the end?

Don't know about the carbine variant. I have an SDP. I'm speaking under correction but I doubt the carbine barrel is threaded. You would prob have to get it threaded by a gunsmith. The process isn't too hard. A good gunsmith could realistically thread your barrel in 10-30 minutes. Just gotta make sure to get it right the first time if you catch my drift.

Yeah $190 is a bit much. I know it's gonna look tacticool and prob cut down on felt recoil etc. However one thing you can be sure of, it's going to be much much louder. More forward weight, it's going to change the CG a bit. That's easy to overcome with some snapping in, as the USMC calls it.

I would like to get one there is no doubt about it. But I want a suppressor a whole lot more. Oh yeah and Jesus, I also want a 100 round drum mag too please. Thank you!

I would go with a fake can for less or just get a real suppressor if I was spending that amount of dough

HK Vortex Flash Hiders back in-stock, but not for long! (Mine is already on the way...)

http://www.hkparts.net/shop/pc/viewPrd.asp?idproduct=2323

Dose anyone have or has seen any pic with a muzzle brake on. Something not so flashy a little more low pro like a BattleCopm.

I have a BattleComp on my 7.5" AK and the threads are probably the same.  You would have an indexing problem as the AK has a pin/detent and uses a wave washer to keep it tightly indexed.  With the SDP you would have to either cut the barrel shoulder or use peel washers to make sure the muzzle device was indexed.  Since I have a suppressor on my SDP and am happy with that setup, I am not going to pull the BattleComp off my AK just to experiment so I really couldn't help you there.

MadDog  

Uploaded with ImageShack.com