Newbie with new Kriss

Been working on it for a while ... I like project guns. Used Brownell's Alumi-Hyde II for the color coat. Modified (machined a new one) the barrel shroud and added a spacer. Lasered it with the gun s/n and TDI label. Used electrical shrink wrap to secure the flashlight switch, works a lot better than Velcro. Easy to remove and replace. The flashlight is an Oveready "Frankenstein" of the Surefire. Took me a while to figure out everything I needed to order separately but, way cheaper than the Kriss tactical package. Still breaking it in. That charging spring is pretty stiff.

Welcome to the forum! Very, very nice first post too!

very nice I like the matching 30 round mags

I am very intrigued by your Barrel Shroud faux suppressor. Mind sharing more details about it?

For the barrel shroud, I purchased a length of 1/16 wall aluminum tubing the same diameter as the factory shroud. I got a couple solid pieces of solid alum. and turned them to a profile similar to a real suppressor with a step so that they could be pressed into the alum. tube. I bored the appropriate size holes in each for the barrel to pass through and used an o-ring in front like the factory one. In back, I machined a step and used a simple split clamp with 10-32 screws. I masked the split with the same electrical shrink wrap I used the secure the flashlight toggle on the grip pod. I knurled it and then, after painting, lased the side to finish the look.

Sweet. How much to make me one hehe.

Solscud007 wrote:Sweet. How much to make me one hehe.

+1

Solscud007 wrote:Sweet. How much to make me one hehe.

+2