Project affordable KRISS Vector case
+12
GNice4U
afponiky
Kipp
Brick Stone
kalabaw
deertrackdesign
DemskeetSkeet
Undrpsi
CatMostFeared
Dtalon03
Antrax
Solscud007
16 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: Project affordable KRISS Vector case
This same case also comes in a 36" size. You might be able to put the Vector in facing the other direction with the stock folded.DemskeetSkeet wrote:...Does anyone know of a smaller case similar to this but deep enough to carry the Vector with the stock folded?
http://www.amazon.com/Plano-108360-Guard-Tactical-Case/dp/B0029KKWT8
mambro- MOD
- Posts : 617
Join date : 2012-01-08
Location : McKinney, TX
Re: Project affordable KRISS Vector case
mambro wrote:This same case also comes in a 36" size. You might be able to put the Vector in facing the other direction with the stock folded.DemskeetSkeet wrote:...Does anyone know of a smaller case similar to this but deep enough to carry the Vector with the stock folded?
http://www.amazon.com/Plano-108360-Guard-Tactical-Case/dp/B0029KKWT8
Definitely looks thick enough! Like you say I could flip it around so the gun sits flat and the stock is towards the lid. I'm sure I could still fit my Glock 21, 2 13 round mags, and 7 25+ mags in there.
I must ponder this for a while.....
DemskeetSkeet- Posts : 40
Join date : 2012-10-10
Re: Project affordable KRISS Vector case
This will be a fun project after I get the vector finished out. I wouldn't suppose you would share the different thicknesses of foam you used? I was going to start researching where to get the foam from. Thanks
Streetsnake- Posts : 3
Join date : 2013-02-17
Pelican 1750 update (URL)
I plopped down the $ for the Pelican through Amazon, as they currently have it on sale. I figured $80 for the added features/durability is worth it. I also have a local foam company that will custom fit a foam blank to the case, but they won't cut. So...I'll buy a blaze red blank for the bottom and some firmer poly (assuming I'll want/need to) for the upper. Scripto tracing and bread knife cutting and I should be good to go . Once I get my Vector (lol, already getting stuff for it), I'll post some pics.
http://www.amazon.com/Pelican-1750-Case-Rifle-Black/dp/B000AOMA1S/ref=sr_1_1?ie=UTF8&qid=1373563573&sr=8-1&keywords=pelican+1750
http://www.amazon.com/Pelican-1750-Case-Rifle-Black/dp/B000AOMA1S/ref=sr_1_1?ie=UTF8&qid=1373563573&sr=8-1&keywords=pelican+1750
patapp2024- Posts : 2
Join date : 2013-07-11
Re: Project affordable KRISS Vector case
A little trick I came across re: foam cutouts, use an electric kitchen (carving) knife. Lay your gear in reverse on the foam, trace with a Sharpie, cut out with the e-knife, then flip it over.
Jubz- Posts : 15
Join date : 2013-07-11
Location : SoCAL
Page 2 of 2 • 1, 2
Similar topics
» Kriss case - Plastic Foaming Company
» Which Kriss to buy for SBR project?
» My KWA KRISS - Undergoing project
» WTS: Kriss Vector Tactical Sling (no pin) and Vector Quick Release Slingmount Pin
» Does the Shroud for the Real Kriss Vector work for the KWA GBB Airsoft Vector?
» Which Kriss to buy for SBR project?
» My KWA KRISS - Undergoing project
» WTS: Kriss Vector Tactical Sling (no pin) and Vector Quick Release Slingmount Pin
» Does the Shroud for the Real Kriss Vector work for the KWA GBB Airsoft Vector?
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum